Jandy ePump 2.7 HP Variable Speed Pump VSSHP270AUT

Item #: VSSHP270AUT

This item is IN STOCK

This item is TEMPORARILY OUT OF STOCK

Usually Ships Within 1 Business Day

Expedited Shipping NOT Available Not Available Outside Contiguous US Local purchase only (Ogden, UT or Las Vegas, NV)
This Item is available in-store only!

This item is IN STOCK

This item is TEMPORARILY OUT OF STOCK

Available for:
Pickup or Local Delivery Only

Pickup or Local Delivery Only

This product cannot be shipped. If you live within our local delivery range, you can choose to have the product delivered to your door, or you can pick it up in store. See below for our location information.


Ogden

Sunplay - Ogden
1075 S Depot Drive
Suite 1
Ogden, UT 84404
Store hours:
9am - 5pm, M-F

Item Details

Jandy ePump Variable Speed Pump VSSHP270AUT

Description:

  • 2.7 Horsepower
  • Variable Speed Motor (600 - 3450 RPM Range)
  • 230 Volts
  • 2" to 2 1/2" Pipe Size
  • Jandy ePump Remote Controller Required (not included) unless you currently have a Aqualink Touch or Aqualink RS OneTouch PDA Systems.

The Jandy ePump delivers optimal performance while reducing energy usage. By combining an ultra high-efficiency motor with the power of Jandy’s premier Stealth pump, the Jandy ePump enables overall energy savings. ePump’s revolutionary variable-speed motor, allows users to customize flow on all water features for maximum efficiency and reduced energy cost.

The Jandy ePump is innovatively designed to exceed the strictest energy efficiency codes. ePump delivers an ideal experience by combining optimal performance with Jandy’s patented quiet technology, so users can focus on the moment, rather than annoying pump noise. And, its robust motor is built to last with minimal upkeep. With its large-capacity trap basket, it also reduces maintenance time, so pool owners can spend more time enjoying their pool and less time maintaining it. Imagine that…


Completely programmable and customizable with 3 control system options:

  • Aqualink RS OneTouch
  • Aqualink RS PDA
  • ePump Controller
  • (Not Included)

The ePump’s ultra-high efficiency motor features a totally enclosed fan-cooled (TEFC) permanent magnet brushless DC motor for cooler, quieter operation and extended motor life.

  • Stealth Pump Technology
  • Powerful, efficient operation
  • Smooth, quiet functioning with Jandy’s patented quiet technology
  • Largest trap basket on the market for reduced maintenance
  • Packed with user-friendly features including ergonomic handles and easy to read indicators

Optional Off-Board Remote Control:

  • The convenient Jandy ePump off-board controller, includes 2 timers and 8 pre-set speeds with easy-to-read LCD/LED display, 2 time-out settings, pump priming, freeze protection and a pressure cleaner pump interface. It also displays power consumption in watts and includes a global RPM limiter and eStar custom setup. The controller can be installed up to 200 feet from the pump. The ePump can also be operated from an Aqualink RS One Touch or PDA control system. Part Number JEP-R.

Jandy ePump VSSHP270AUT

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Michael K.
Showed up really fast

Showed up really fast

J
John M.
Very nice pump, direct drop-in for older single speed Jandy Stealth style. VERY QUIET!

Integrates perfectly with Aqualink. Very easy to use. Lot's of handy features added to Aqualink once you install this pump. This was an absolute direct drop in for an older Jandy Stealth series pump. No plumbing required at all. Very minor high voltage electric and fairly simple to integrate into the low voltage Aqualink side with one wire and a setting change in the software. After install, software configuration is a bit more complicated, but 3rd party online videos walk through it very nicely. Super quiet.

P
Peter M.
Awesome pump

used to run a single speed pump all winter at 2300 Watts. Now I'm running at 950 RPM and only 70 Watts. This pump will pay for itself in two winters. And at 950 RPM it barely makes any noise.

D
David
Great Pool Pump!

This pump was easy to install and set up with the Jandy Variable Speed Pump User Interface (iQPUMP01). I removed my old two-speed pump, made a few modifications to the PVC plumbing, connected the 220vac, hooked up the interface according to instructions. Now I have a great pump that I control in an infinite number of speeds and time schedules, and all from the convenience of my cell phone. It does not get better than this!

Recently Viewed

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Michael K.
Showed up really fast

Showed up really fast

J
John M.
Very nice pump, direct drop-in for older single speed Jandy Stealth style. VERY QUIET!

Integrates perfectly with Aqualink. Very easy to use. Lot's of handy features added to Aqualink once you install this pump. This was an absolute direct drop in for an older Jandy Stealth series pump. No plumbing required at all. Very minor high voltage electric and fairly simple to integrate into the low voltage Aqualink side with one wire and a setting change in the software. After install, software configuration is a bit more complicated, but 3rd party online videos walk through it very nicely. Super quiet.

P
Peter M.
Awesome pump

used to run a single speed pump all winter at 2300 Watts. Now I'm running at 950 RPM and only 70 Watts. This pump will pay for itself in two winters. And at 950 RPM it barely makes any noise.

D
David
Great Pool Pump!

This pump was easy to install and set up with the Jandy Variable Speed Pump User Interface (iQPUMP01). I removed my old two-speed pump, made a few modifications to the PVC plumbing, connected the 220vac, hooked up the interface according to instructions. Now I have a great pump that I control in an infinite number of speeds and time schedules, and all from the convenience of my cell phone. It does not get better than this!