Leisure Time pH Balance Plus - 3 Pounds
pH Balance Plus works by locking in the proper pH level in your spa to help prevent the unnecessary, costly and time consuming pH adjustments. It can be called a unique granular formula that is going to prevent your pH from fluctuating from the time you refill the spa with fresh water until the time it needs to be drained.
All that is required is, for you to check the pH level of your spa upon filling it and adjusting it to the recommended pH range (7.2-7.6). Once you have adjusted to the proper range, add pH Balance Plus and you are set until you drain and refill the water again.
Directions for use:
Proper pH range for hot tub water is 7.2 to 7.6. pH Balance Plus is going to help keep the spa water within the proper range. Be sure that you are testing the pH weekly and adjusting if required
Leisure Time 45410A
- In a freshly filled spa, test the pH. If pH level is between 7.0 and 8.0 proceed to step 2. If it's not within this range, adjust with pH Up or pH Down until it's within the 7.0 and 8.0 range and proceed to step 2.
- Add 1.5 pounds (half the jar) of pH Balance Plus for up to 250 gallons of hot tub water or the entire 3 pounds for up to 500 gallons of hot tub water. It needs to be poured directly into spa.
- Turn ON jets and allow water to circulate for 15 minutes. Temporary cloudiness may be present, but the water will clear quickly once the product has fully dissolved.
- Repeat the application each time you refill your hot tub with fresh water.