Test
Olympic Poxoprime II Primer Olympic Poxoprime II Primer

Poxoprime II is designed to be used with epoxy based paints. It is recommended to be used over uncoated/unfinished concrete or plaster surfaces. The primer can be applied on damp surfaces which allows you to clean and prime the pool in a single day.

Bare plaster or concrete are highly absorbent materials which tend to soak up the first coat. Therefore, a primer should be used to soak in, seal the surface and provide a smoother profile for surfacing.

Poxoprime II Primer Features:
  • Surface primer for epoxy based pool paints
  • Compatible with wet surfaces for single day pool prep and priming
  • For use on uncoated concrete and plaster surfaces
  • Soaks in and seals the pool surface
Coverage Per Gallon:
  • Each Gallon of Poxoprime II will cover approximately 200 to 250 square feet of pool surface area.
How to Apply:
  • The primer can be applied using either a paint roller or airless spray equipment.
Notes:
  • Proxoprime II should only be used as a base coat for epoxy pool paints such as Poxolon 2 and Zeron paints.
  • Do not use epoxy primers as an undercoat for rubber-based pool paints.
  • Do not apply over any old or existing pool coating.
5 5 1 1

Olympic Poxoprime II Primer

Availability: In stock

$34.95

Write a Review Ask a Question
Product Number: 214
Usually Ships Within 1 to 3 Business Days

* Required Fields


Full Description
Olympic Poxoprime II Primer

Poxoprime II is designed to be used with epoxy based paints. It is recommended to be used over uncoated/unfinished concrete or plaster surfaces. The primer can be applied on damp surfaces which allows you to clean and prime the pool in a single day.

Bare plaster or concrete are highly absorbent materials which tend to soak up the first coat. Therefore, a primer should be used to soak in, seal the surface and provide a smoother profile for surfacing.

Poxoprime II Primer Features:
  • Surface primer for epoxy based pool paints
  • Compatible with wet surfaces for single day pool prep and priming
  • For use on uncoated concrete and plaster surfaces
  • Soaks in and seals the pool surface
Coverage Per Gallon:
  • Each Gallon of Poxoprime II will cover approximately 200 to 250 square feet of pool surface area.
How to Apply:
  • The primer can be applied using either a paint roller or airless spray equipment.
Notes:
  • Proxoprime II should only be used as a base coat for epoxy pool paints such as Poxolon 2 and Zeron paints.
  • Do not use epoxy primers as an undercoat for rubber-based pool paints.
  • Do not apply over any old or existing pool coating.