Yard Guard Deck-Lock Mesh Safety Cover - 16' X 36' With Center Step - Green
The Yard Guard Deck-Lock Mesh Safety Cover is the latest in pool cover technology and offers increased protection due to porous tight mesh. Mesh safety covers trap the finest silt and debris and prevents it from entering your swimming pool water, allowing water to filter through the cover relieving the pressure on pool walls and cover. Featuring triple stitching cross tack and box tack at all perimeter stress points and straps run on both the top and bottom of the cover for added strength. A raised rub strip prevents chafing on the pool edge or coping and all covers are manufactured in the USA by the most modern equipment including a computerized cutting and shaping system. If you want the best for your swimming pool, this is it.
Deck-Lock Mesh Covers resist rot, mildew, UV rays and damage caused by harsh pool water conditions. Deck-Lock Mesh Covers throughout every stage of production are quality checked and signed for before final packaging. Each Deck-Lock Mesh cover includes installation tool and the required brass plugs, brass screws, spring buckles and vinyl sleeves and are individually packaged. The brass anchors and Stainless steel springs are corrosion resistant.
The Deck-Lock safety covers require approximately three feet around the edge of the pool for installation. The cover will extend 2 feet around the perimeter of the pool and the strap and spring buckle requires about another foot.
The Center Step option is to cover steps that extend beyond the length of the swimming pool. On one end the cover will extend an additional 4' longer and have a 8' width. The step extension is positioned in the center of the cover.
Deck-Lock Mesh Safety Cover Features:
- In-ground pool safety cover.
- Fits a 16' X 36' Swimming Pool with Center Step
- Made of porous, tight mesh for maximum strength.
- Triple stitching cross tack and box tack at all perimeter stress points.
- Reinforced vinyl and reinforced webbing both top and bottom on every seam protected by rub strips.
- A raised rub strip prevents chafing on the pool edge or coping.
- Straps run on both top and bottom of the cover for added strength.
- White thread to assure perfect sticking throughout the cover.
- Manufactured in the USA and Canada by the most modern equipment including a computerized cutting and shaping system.
- Includes installation tool and the required brass plugs, brass screws, spring buckles and vinyl sleeves.
- 12 Year manufacturers warranty (2 year full)
Color - Green
- You must have at least 3 feet of concrete decking around your swimming pool for installation.
- This cover is for use ONLY on rectangle swimming pools with square corners or no more than a 2' radius corner.
- Cannot be used on pools with ladders, diving boards, slides, etc., that have posts or other obstruction within 18" away from the perimeter of the pool that cannot be removed.
How do you choose which size of Safety Cover to order? You should order based on the size of your swimming pool. For example; if you have a 18' X 36' swimming pool then you would want to order a 18' X 36' safety cover. The actual cover size will be a little larger to hang over your pool deck and for proper installation. Always order based on pool size.