Leisure Time Spa Up - 2 Pound Bottle
Spa Up by Leisure Time rapidly raises the pH and Total Alkalinity in your spa. The cause of skin and eye irritation and damage to your spa equipment, can be led to having low pH. When your pH level is between 7.2 to 7.6 you can rest, knowing that your swimming is going to be enjoyable and safe. Also, a proper pH level is required to ensure that your sanitizer will effectively kill bacteria and any other contaminants that may be present.
This product should be used as necessary when pH is below 7.2.
Directions for use:.
- Determine Amount of spa put to use
- Make sure equipment is OFF.
- Add applicable amount of this product to the spa water.
- Turn on circulation system for 1 to 3 hours
- Retest water after 3 hours
- If pH is still below 7.2, repeat steps 1-5
If your pH is between 6.8 - 7.2 add 1 Ounce (2 tablespoons) of Spa Up per 500 gallons of spa water
If your pH is Below 6.8 add 2 Ounce (4 tablespoons) of Spa Up per 500 gallons of hot tub water
Note: Leisure Time does advise that you dissolve this granular chemical first by adding Spa Up to a small, plastic pail filled with water. Then, apply the solution to the spa water.
Active Ingredients: Sodium Bicarbonate 100% (sodium bicarbonate will raise both pH and Alkalinity which may not be necessary if your Alkalinity is in its proper range and just your pH is low. If you are only wanting to raise the pH in your spa then you may want a product that uses Sodium Carbonate as its active ingredient and will leave your Alkalinity mostly unaffected).
Leisure Time 22339A